| The One Ring http://wwww.one-ring.co.uk/ |
|
| Working with Wood from the Woods http://wwww.one-ring.co.uk/viewtopic.php?f=7&t=33684 |
Page 1 of 1 |
| Author: | Wan Shi Tong [ Sun Aug 12, 2018 9:24 pm ] |
| Post subject: | Working with Wood from the Woods |
Does anyone have any experience using dead wood from the wild rather than the stuff one buys at the store? Particularly what should be done to pretreat the stuff before I start working with it? I have hear some people who use wood for in bird enclosures bake the branches in an oven at low heat to dry it out and kill molds. Is that sort of thing necessary for modeling? Should I peal the bark off and paint it or will the wood last if I leave the bark on? I would appreciate some advise on this. Thanks. |
|
| Author: | Cave Dragon [ Mon Aug 13, 2018 1:59 am ] |
| Post subject: | Re: Working with Wood from the Woods |
Wan Shi Tong wrote: Does anyone have any experience using dead wood from the wild rather than the stuff one buys at the store? Particularly what should be done to pretreat the stuff before I start working with it? I have hear some people who use wood for in bird enclosures bake the branches in an oven at low heat to dry it out and kill molds. Is that sort of thing necessary for modeling? Should I peal the bark off and paint it or will the wood last if I leave the bark on? I would appreciate some advise on this. Thanks. Have not done this, but you will want to be sure to protect it from rotting somehow, so it does not get mold. Depends what it is for, too. But I think it should be dry wood, not wet or green. Completely dead, but not rotten. Try calling a hardware store like Hone Depot, they probably know best. |
|
| Author: | Zach [ Mon Aug 13, 2018 2:37 pm ] |
| Post subject: | Re: Working with Wood from the Woods |
Cave Dragon wrote: Wan Shi Tong wrote: Does anyone have any experience using dead wood from the wild rather than the stuff one buys at the store? Particularly what should be done to pretreat the stuff before I start working with it? I have hear some people who use wood for in bird enclosures bake the branches in an oven at low heat to dry it out and kill molds. Is that sort of thing necessary for modeling? Should I peal the bark off and paint it or will the wood last if I leave the bark on? I would appreciate some advise on this. Thanks. Have not done this, but you will want to be sure to protect it from rotting somehow, so it does not get mold. Depends what it is for, too. But I think it should be dry wood, not wet or green. Completely dead, but not rotten. Try calling a hardware store like Hone Depot, they probably know best. I would avoid calling Home Depot; as a previous harware store employee I can tell you the majority of the folks working at the big box stores know little to nothing about the products and projects they are selling. I have worked with wood before, and treating it can be very simple. I suggest letting the wood dry out completely (feel free to do this via the baking technique you mentioned above or naturally, either will work depending on the time you have). After the wood is dry, take an old brush and brush a thin layer of wood glue or apply a thin layer of matte varnish to the wood. I've used both of the techniques I detailed on pieces I made nearly 10 years ago and have had no issues with rot and what not thus far. Hopefully that helps!! |
|
| Author: | Wan Shi Tong [ Tue Aug 14, 2018 1:36 pm ] |
| Post subject: | Re: Working with Wood from the Woods |
Interesting. Thank you for the feedback Zach. I will have to run some tests to see what kind of seal I want to use. |
|
| Author: | Nevinsrip [ Thu Sep 06, 2018 5:22 am ] |
| Post subject: | Re: Working with Wood from the Woods |
I use natural wood in many of my terrain pieces. I keep an old Microwave in my garage to zap whatever in bring in from the wild. Wood is combustible, so you have to stand there and watch it. 20-30 seconds maximum. While it's still warm, soak the wood in a solution of 50 & Matte Medium and 50% water. The wood will absorb the solution, and seal it so that nothing can grow inside. It also prevents the wood from rotting. That's it. |
|
| Page 1 of 1 | All times are UTC |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|