The One Ring
http://wwww.one-ring.co.uk/

hot wire cutter
http://wwww.one-ring.co.uk/viewtopic.php?f=7&t=31084		 Page 1 of 1
Author:  a Hobbit [ Fri Jun 05, 2015 2:34 pm ]
Post subject:  hot wire cutter
i have just recently accuired a hot wire cutter. it works great and all but how do i get completly strait lines when cutting?
Author:  SidTheSloth [ Fri Jun 05, 2015 2:38 pm ]
Post subject:  Re: hot wire cutter
You could perhaps guide the wire cutter along with something non-meltable such as a wooden block?
Never had experience with one but it's an idea...
Author:  Oldman Willow [ Fri Jun 05, 2015 7:57 pm ]
Post subject:  Re: hot wire cutter
The answer depends on what kind of wire cutter you have.

A fence or straight edge or a stronger spring?

Image

Fence

Image

Strong spring

Image

This model does not come with a fence but you can make one with two clamps and a wooden ruler. I like the commercial cutter from this company a lot.

Image

This is my home made circle cutter. My new hot knife has an attachment like this jig saw.

Image

The command hot knife is set up to use all of my jig saw accessories.

Image

If you have a bow style cutter. Make sure the wire is very tight hot metal expands. Cut slowly. Adjust the temperature so that there is no smoke do NOT let the wire get red hot. If there is no adjustment go slow with a straight edge. It is not possible to have enough ventilation. I use mine outside with a fan.
Author:  a Hobbit [ Fri Jun 05, 2015 11:13 pm ]
Post subject:  Re: hot wire cutter
i have this
Author:  Oldman Willow [ Sat Jun 06, 2015 11:58 am ]
Post subject:  Re: hot wire cutter
Very nice. I would start with a fence.

Think of a hot wire like a scroll saw. Not really the tool for long straight square cuts. A bandsaw or table saw is of course better. Does that mean you can not use it of course not.

Image

This is a simple fence held down with a small hobby clamp. Use two clamps. Some small old fashioned C clamps might be best with your cutter. Be sure to set the fence up with a square.

Image

Unlike the scroll saw blade the hot wire will cut in all directions so you will be able to run the fence in different directions.

Image

I like quick release clamps but the C clamps are cheep

I noticed a typing error in my last post. I will change it. Do NOT let the wire get red hot.
Author:  Bernardo [ Sat Jun 06, 2015 9:10 pm ]
Post subject:  Re: hot wire cutter
I agree with the above, and take the time while cutting.
Don't push the wire through too fast or too slow.
If you feel a decent resistance you are going too fast.
Page 1 of 1 All times are UTC
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
http://www.phpbb.com/