| The One Ring http://wwww.one-ring.co.uk/ |
|
| Varnish http://wwww.one-ring.co.uk/viewtopic.php?f=7&t=28590 |
Page 1 of 1 |
| Author: | TheBossman40k [ Tue Apr 22, 2014 5:20 am ] |
| Post subject: | Varnish |
So guys, after scratch building a battlefields worth of ruins and terrain, I came to the topic of varnishing. I am aware its not necessary, but I'd like to anyway. That aside, how do I tell if the varnish is enough? I understand that if I apply thin coats and don't put dozens of it won't go cloudy, but how do I know if I've even COVERED THE WHOLE MODEL? In this case building, but the former as well: do you guys have any tips on checking or maybe for the process of applying to help me get my varnishing right? Cheers. |
|
| Author: | Jobu [ Tue Apr 22, 2014 1:10 pm ] |
| Post subject: | Re: Varnish |
You could get a brush on varnish and then you could tell the "wet" covered areas from the uncovered ones. Or if you want tk spray, do a gloss coat first then follow that up with matte coats. I usually only varnish terrain that I give to my FLGS because those pieces see so much abuse. |
|
| Author: | Gandlaf the Grey [ Tue Apr 22, 2014 3:40 pm ] |
| Post subject: | Re: Varnish |
Section it off in your mind and cover one part at a time and methodically work your way around. You can even write it down and tick each off if it helps. |
|
| Page 1 of 1 | All times are UTC |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|