The One Ring http://wwww.one-ring.co.uk/ |
|
Small terrain project budget http://wwww.one-ring.co.uk/viewtopic.php?f=7&t=21593 |
Page 1 of 3 |
Author: | Oldman Willow [ Mon Sep 05, 2011 10:19 pm ] |
Post subject: | Small terrain project budget |
http://www.x-rates.com/calculator.html How much would you consider a reasonable budget for a small terrain project? I am going to work up an article on basic terrain making and I need some general information. There is a currency calculator in the above link so you can take the poll in US Dollars. Please make suggestions and comments after you take the poll. I am going to need some idea of what kind of tools beginners already have for a base line.Not sure how to make that a poll. tool article below kb.php?a=1 |
Author: | oxford_guy [ Tue Sep 06, 2011 12:16 am ] |
Post subject: | Re: Small terrain project budget |
firstly you need to let us know what you are thinking of creating and how you would like to make it there are a million ways things can be done also depends on the finish and size etc need more detail to be able to give an accurate answer |
Author: | Oldman Willow [ Tue Sep 06, 2011 1:49 am ] |
Post subject: | Re: Small terrain project budget |
I was more concerned with what the readers can afford for a project. I could make a table with folding legs for $50.00 or a tree for $1.00 but if more people can spend $10.00 than $50.00. I will concentrate on projects that cost $10.00 or less. I need to say something about tools. I don't want to go on about a power drill if most people don't have one.The same with hand tools. I won't suggest any thing that requires a spoke shave. This is a good guide for tools kb.php?a=1 Quote: what you are thinking of creating and how you would like to make it Hills, mountains,caves, waterfalls , forest, rivers, lakes swamps, basic beginner terrain. I only have two votes so far. I think how to make a forest for $10.00 might be a start. |
Author: | Erunion [ Tue Sep 06, 2011 2:21 am ] |
Post subject: | Re: Small terrain project budget |
I voted $20. Seems reasonable for decent sized piece of terrain. Of course, many things can be made for much cheaper! |
Author: | Slythar [ Tue Sep 06, 2011 2:27 am ] |
Post subject: | Re: Small terrain project budget |
I don't really have a budget but I try to do everything as free as possible. The only thing I can reasonably budget for is glue and paint. Basically everytime you do a project you are going to accumulate this stuff. This is my basic Mats on Hand From the Hardware Store (Since I work there) Stuff I bought at the Hardware Store - Fine Files (Round,triangle and straight) - Exacto-Knife and a pack of blades (Heavy duty) - Mitre box with saw - Tin Snips - Vice Grips - Drywall Knife - Utility Knife with Precision Blades - Square - Locking Pliers - Clamps - 5 sheets of Sandpaper 120 grit and some sanding blocks - Wood Glue (Full Strength) - Wood Glue (1/2 diluted) - Wood Glue (1/4 diluted) - Wood Glue (1/8 diluted) - Crazy Glue (all-purpose) - Plumbers Glue (plastic glue) - Green Stuff (Marine Epoxy) - Wood Filler - Drywall Filler - Various brushes, sponge brushes - Glue gun and Glue sticks - Gallon of Acrylic paint (rejects and returns only), Dark Brown for dirt and Grey for rocks. - Playsand - Plumbers Putty (for weighing down my bases) - Fender Washers (as big and thin as possible) - Roll of Tie Wire Stuff I get for free at the HW store - 1/2" MDF coverboards - 1/8" MDF coverboards - 1/8" Hardboard coverboards - 1" to 3" broken styrofoam. They come with Sytrofoam dunnage... very handy for Moria Pillars or walls - 1/2" Corrogated Cardboard from packaging - 1"x1" Nailing Strips (broken/curvy) - Vinyl flooring ends - 1/16" Lathe (in between lifts of dimensional lumber lathe is placed to keep the loads secure, and its all over the place) Stuff I get from the Dollar Store - Cheap Acrylic Paint (for terrain) - Toys - Sword toothpicks - BBQ scewers - Scouring pads Things I found on the Curb Artificial Christmas Tree Foam, bedding (for making your storage trays) Styrofoam Cardboard Stuff I have thats nice to borrow aswell Table Saw Mitre Saw Router Drill Press Electric Drill Vice Clamp |
Author: | Oldman Willow [ Tue Sep 06, 2011 3:02 am ] |
Post subject: | Re: Small terrain project budget |
Quote: I try to do everything as free as possible. I try to use as much scrap as I can. I find all kinds of things free.I use a lot of saw dust. Good tool list too. |
Author: | Slythar [ Tue Sep 06, 2011 3:53 am ] |
Post subject: | Re: Small terrain project budget |
I was thinking saw dust too but it seemed like such a pain. I live in a town house and my shop is on the patio deck so mixing paint with sawdust and sifting it... bah... I'm buying the woodland Scenics. Its actually not that expensive. I use the big pack saw so I do have access to lots of sawdust. So fun bucking lifts in half. |
Author: | valpas [ Tue Sep 06, 2011 6:30 am ] |
Post subject: | Re: Small terrain project budget |
It's really impossible for me to answer to this. But I'm going to, anyway. When I started the hobby, all terrain building was quite expensive for me because I didn't have anything but scissors and card. Even the smallest project had a big start-up cost but I can't really consider that cost only for the particular project because the tools and most of the materials can be used again for many projects. I still have some of my first balsa wood and plasticard purchases left and of course all the tools are still usable. I bought a $35 silicon mould from Hirst Arts to make a small bridge but I've used the mould for many other projects and when I purchased it, I knew it would be useful for the rest of my days, so I did not consider it a 35-dollar-bridge. I've even used my tools for non-terrain purposes, for example my long steel ruler, sharp knives, fillers etc. were very useful when I helped my brother wallpaper his apartment. To me it's impossible to set a cost of a tool or material to a single project unless it is used solely for that project. -- Pasi |
Author: | Sticky Fingersss [ Tue Sep 06, 2011 12:49 pm ] |
Post subject: | Re: Small terrain project budget |
My list: Foamboard-4 dollars PVA-4 dollars Hobby Knife -2 dollars unless you want to include stuff like paints... |
Author: | Oldman Willow [ Tue Sep 06, 2011 6:55 pm ] |
Post subject: | Re: Small terrain project budget |
Not many new people have posted yet. Quote: To me it's impossible to set a cost of a tool or material to a single project unless it is used solely for that project. I think you are right about that. I think most people will have the most basic tools. But I am not sure what counts as basic. Quote: I was thinking saw dust too but it seemed like such a pain. I like it better than sand but not every one can get it free. Quote: unless you want to include stuff like paints... I was thing materials and paint. You would not want to waste GW paint on bark. |
Author: | GothmogtheWerewolf [ Tue Sep 06, 2011 8:27 pm ] |
Post subject: | Re: Small terrain project budget |
Since £30 is apparently $48.something, I've put more on, but there's not much more that I havee to say except find lots of bargains. |
Author: | Oldman Willow [ Tue Sep 06, 2011 8:59 pm ] |
Post subject: | Re: Small terrain project budget |
Quote: not much more that I have to say except find lots of bargains. I will try to do that! |
Author: | Dead Marsh Spectre [ Tue Sep 06, 2011 9:45 pm ] |
Post subject: | Re: Small terrain project budget |
I've never made any terrain to date so I voted for the maximum - I have a lot of tools anyway so wouldn't have to buy them but I would want to spend whatever was necessary on materials to make a detailed as possible piece. I suppose what is "reasonable" depends on the individuals circumstances. |
Author: | Oldman Willow [ Tue Sep 06, 2011 9:56 pm ] |
Post subject: | Re: Small terrain project budget |
Quote: "reasonable" depends on the individuals circumstances Very true. The poll is trending higher than I believed it might. I will give it some time. Tools don't seem to be much of a problem. |
Author: | talset [ Thu Sep 08, 2011 10:10 am ] |
Post subject: | Re: Small terrain project budget |
Well i have built two basic boards out of simple materials (cardboard, paper mache etc) but i spent £25 on the citadel scenery painting pack alone, so i voted for a little more. On the plus side i have used very little of the paint and grass for two 1 foot by 2 foot boards so it should serve me well for a while yet. |
Author: | Oldman Willow [ Tue Sep 13, 2011 11:48 pm ] |
Post subject: | Re: Small terrain project budget |
I am going to go shopping for current prices and I should have a better idea by next week. |
Author: | Oldman Willow [ Sun Sep 18, 2011 11:47 pm ] |
Post subject: | Re: Small terrain project budget |
A 10mm WWI gamer suggested a stretchable fabric glue. I am testing it VS school glue. I pinhed down the fabric and attached some flocking. I should have waited between layers. It is not usually necessary. Cloth soaks up the glue so the second layer did not stick like I am use to.I will wait to see how it turns out before I try static grass, I am not sure how to cost some of the materials. The floor Matt was $10 but it will make a lot of crop fields. The normal felt is about $.30 ea. The textured felt is $.99 ea.The bark is free. May be I should cost glue and flocking for start up. |
Author: | Oldman Willow [ Mon Sep 19, 2011 12:45 pm ] |
Post subject: | Re: Small terrain project budget |
I removed the pins from the felt this morning. The fabric glue is a lot better. The school glue made the felt as stiff as card. That is really not a problem in it self. The flexible stretchable fabric glue leaves the felt like cloth. This could be very desirable.I will try a larger piece with static grass. |
Author: | Elros of Numenor [ Mon Sep 19, 2011 1:05 pm ] |
Post subject: | Re: Small terrain project budget |
Oldman Willow wrote: I am going to work up an article on basic terrain making Yay I cant wait!! Unfortunately I dont have any input... oh well |
Author: | Willow Goldenleaves [ Mon Sep 19, 2011 2:38 pm ] |
Post subject: | Re: Small terrain project budget |
I think (as an educated beginner) that it would help to address the basics: What are they? What tools will I be able to use for other projects (which clearly will bring the per-project cost down but be more of an initial investment)? When you say "small", do you mean under a foot square or larger? my workspace is limited, as is my drying-time for glue or paint. I also like to use re-purposed items like the sawdust, sand and tree bark you reference. I appreciate any advice you can offer as an experienced designer/artisan. Thanks. |
Page 1 of 3 | All times are UTC |
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |