The One Ring http://wwww.one-ring.co.uk/ |
|
Thinking about building my first terrain http://wwww.one-ring.co.uk/viewtopic.php?f=7&t=19701 |
Page 1 of 1 |
Author: | Munkerz [ Mon Nov 08, 2010 4:00 pm ] |
Post subject: | Thinking about building my first terrain |
And I have a question about the MDF; is 4mm too thin? I found what seems to be a god price for 10 x mdf sheets, 600mm x 300mm x 4mm thick; allowing me to build a sizeable modular map, but if that's going to warp like crazy I'd like to know. |
Author: | Ranger of Gondor [ Mon Nov 08, 2010 4:16 pm ] |
Post subject: | Re: Thinking about building my first terrain |
Hmm... I don't see any problem whatsoever with 4mm MDF. As long as you don't put too much weight on it everything'll work out just fine. However concerning the warping, I can't tell you whether it'll warp or not... my guess is it won't... MDF is some pretty solid stuff. Good luck (: |
Author: | valpas [ Mon Nov 08, 2010 5:05 pm ] |
Post subject: | Re: Thinking about building my first terrain |
It may warp a bit but it may not warp at all. Very helpful, right? My 10 mm thick 600 mm * 1200 mm boards have warped somewhat (only in the 'long direction'), but since you'll have smaller pieces you may not have any trouble even with 4 mm. In any case it's probably not going to warp like crazy. -- Pasi |
Author: | Munkerz [ Mon Nov 08, 2010 5:17 pm ] |
Post subject: | Re: Thinking about building my first terrain |
Ok, thanks guys. I'll buy those soonish, and at the price I guess it doesn't actually matter all that much if they do a little. |
Author: | xenton [ Mon Nov 08, 2010 7:41 pm ] |
Post subject: | Re: Thinking about building my first terrain |
One tip I can give you is, paint the underside also. It prevents the warping effect significantly with 4mm thick MDF. |
Author: | Munkerz [ Mon Nov 08, 2010 10:38 pm ] |
Post subject: | Re: Thinking about building my first terrain |
Ah yes, I would have completely forgot about that had you not reminded me. I'd be rather embarrassed actually to have missed that, should it have warped. |
Page 1 of 1 | All times are UTC |
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |