| The One Ring http://wwww.one-ring.co.uk/ |
|
| Model Stripping http://wwww.one-ring.co.uk/viewtopic.php?f=30&t=29485 |
Page 1 of 1 |
| Author: | Barrel Rider [ Fri Sep 26, 2014 10:22 am ] |
| Post subject: | Model Stripping |
So I bought some models on EBay and they happen to be painted. Not that the paint job is bad but I like to paint models myself as it makes them my own. So my question is does anyone know a good and cheapish paint stripper? One that doesn't cause damage to the model but removes all the paint and preferably something you guys have tried yourselves. Also as a side question does anyone know how to remove basing stuff just the average sand and grass flock? Thanks in advance 
|
|
| Author: | Honba [ Fri Sep 26, 2014 11:06 am ] |
| Post subject: | Re: Model Stripping |
Nail polish remover works well on metal models. Never tried it on plastic... |
|
| Author: | Rangefinder [ Fri Sep 26, 2014 12:37 pm ] |
| Post subject: | Re: Model Stripping |
In the USA we have a product called Simple Green. I used it with great results on metal models. Let the models soak over night and the paint peeled right off. What was left on it I brushed away with a toothbrush. Then for the knooks and crannies, I used a wooden toothpick. |
|
| Author: | Gene Parmesan [ Fri Sep 26, 2014 1:22 pm ] |
| Post subject: | Re: Model Stripping |
Dettol seems to work on all models, nail polish remover works on metal only (unless acetone free). Hard toothbrush should scrub it off. |
|
| Author: | jdizzy001 [ Fri Sep 26, 2014 4:08 pm ] |
| Post subject: | Re: Model Stripping |
Simple green. It works on minis of all materials. Pour undilutted simple green into a container and let your mini soak in it for 24 hours. Once the time has elapsed, take a discarded toothbrush and scrub the paint off. Resoak and rebrush if you wish. |
|
| Author: | Rangefinder [ Fri Sep 26, 2014 4:24 pm ] |
| Post subject: | Re: Model Stripping |
ahhhhh...., thank you for the tip on using Simple Green with plastic. I was tempted to try but kind of fearful. Got some Rohan poorly based but was going to work with them anyway. This gives me a bit of confidence going into all that! |
|
| Author: | Mapper [ Fri Sep 26, 2014 5:06 pm ] |
| Post subject: | Re: Model Stripping |
yep, don't use full strength nail polish remover on plastic models, had a couple of wargs I was trying to dissolve the glue on that turned into a nice soft, no feature blobs that I had to throw away. Works great on metal though. |
|
| Author: | Creaky [ Fri Sep 26, 2014 6:46 pm ] |
| Post subject: | Re: Model Stripping |
Yes, brown dettol is my go to for stripping minis, both plastic and metal. Messy as hell, stinks a bit too, but works out allright. 50/50 bath dettol and water, let them have a soak over night and give them a damn good brushing and cleanup the next day. Wear gloves. Dettol seemed to work ok on the bases of the last minis I stripped, they were just static grass, but it came off easily enough. Couldn't say for certain re: sand, though. |
|
| Author: | Barrel Rider [ Fri Sep 26, 2014 9:34 pm ] |
| Post subject: | Re: Model Stripping |
Thanks everyone! I will see if my local shops provide some of these. Unfortunately I don't live in America and the shipping is too expensive just for Simple Green but I appreciate knowing about it. Thanks again everyone
|
|
| Author: | pokyha [ Sat Sep 27, 2014 2:53 am ] |
| Post subject: | Re: Model Stripping |
Will scrubbing the paint off with a toothbrush leave scratch marks on metal or plastic models? Does it make a difference if I use a hard or soft toothbrush? |
|
| Author: | jdizzy001 [ Sat Sep 27, 2014 5:59 am ] |
| Post subject: | Re: Model Stripping |
Use a soft toothbrush, it will *not* leave marks. I use them all the time. PS- use a soft toothbrush on your teeth too. There is no reason to use a medium or hard unless directed to by your dentist. |
|
| Author: | pokyha [ Sat Sep 27, 2014 1:02 pm ] |
| Post subject: | Re: Model Stripping |
 Haha Thanks for the tip I already use a soft one 
|
|
| Author: | redeaston [ Sun Sep 28, 2014 6:43 am ] |
| Post subject: | Re: Model Stripping |
Fairy power spray works well on both plastic and metal and I don't find it as messy or as smelly as detol. |
|
| Author: | othar [ Sun Sep 28, 2014 6:23 pm ] |
| Post subject: | Re: Model Stripping |
redeaston wrote: Fairy power spray works well on both plastic and metal and I don't find it as messy or as smelly as detol. hello, the most economic and best result, for me, the brake fluid for cohe (dot-dot-4 or 3), rub with brush teeth, ear buds and a pin ... that if washing hands well afte 
|
|
| Author: | Pindergorn [ Fri Oct 10, 2014 1:01 pm ] |
| Post subject: | Re: Model Stripping |
Gene Parmesan wrote: Dettol seems to work on all models, nail polish remover works on metal only (unless acetone free). Hard toothbrush should scrub it off. I picked up a bottle of Dettol Power & Fresh today, the blue scented liquid multi-purpose cleaner. Click to: Show Will this work for metal and plastic models? Or should I get the plain (brown?) version? Tesco only had this blue one. Also, what effect does dettol and other stripping agents have on Greenstuff and superglue bonds? I have a warg chieftain that I want to strip but he was a right ***** to assemble and I did a lot of greenstuf gap filling. |
|
| Author: | Crucium Giger [ Fri Oct 10, 2014 1:13 pm ] |
| Post subject: | Re: Model Stripping |
redeaston wrote: Fairy power spray works well on both plastic and metal and I don't find it as messy or as smelly as detol. No more needs to be said, just switched to using this recently and its a godsend. |
|
| Author: | Ukfreddybear [ Fri Oct 10, 2014 4:25 pm ] |
| Post subject: | Re: Model Stripping |
Yep fairy power spray is what my local GW uses. Thoroughly recommended. |
|
| Author: | Creaky [ Mon Oct 13, 2014 5:12 pm ] |
| Post subject: | Re: Model Stripping |
Aranarth wrote: Gene Parmesan wrote: Dettol seems to work on all models, nail polish remover works on metal only (unless acetone free). Hard toothbrush should scrub it off. I picked up a bottle of Dettol Power & Fresh today, the blue scented liquid multi-purpose cleaner. Click to: Show Will this work for metal and plastic models? Or should I get the plain (brown?) version? Tesco only had this blue one. Also, what effect does dettol and other stripping agents have on Greenstuff and superglue bonds? I have a warg chieftain that I want to strip but he was a right ***** to assemble and I did a lot of greenstuf gap filling. Not sure how it effects Greenstuff or superglue, sorry, but I'd definitely go for the 'pure' brown dettol. That'd work on metal and plastic alike. I recall some weakness of the superglue bonds - but that may simply have been because the glue was poor, the models old, or maybe I simply dumped too many heavy metal models into a bucket with too much gusto. 
|
|
| Page 1 of 1 | All times are UTC |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|
