The One Ring
http://wwww.one-ring.co.uk/

Mordor Uruk-hai
http://wwww.one-ring.co.uk/viewtopic.php?f=30&t=26807
Page 1 of 1

Author:  pokyha [ Tue Nov 19, 2013 3:12 am ]
Post subject:  Mordor Uruk-hai

Hi, has anyone got any Ideas for converting plastic minis to mordor Uruk-hai?

Maybe from mordor orcs, isenguard?

Any help would be much appreciated, thanks in advance.

Author:  Armandhammer [ Tue Nov 19, 2013 3:50 am ]
Post subject:  Re: Mordor Uruk-hai

Simply convert uruk scouts.

You just got to replace the recognizable Isengard sword/shield with orc like weaponry.

I got the idea from an individual over at LA:

http://www.thelastalliance.com/viewtopi ... t=10#p7189

Author:  Sithious [ Tue Nov 19, 2013 4:22 am ]
Post subject:  Re: Mordor Uruk-hai

I never did anything with plastics, but I made a lot of conversions with metal isengard uruks and mordor uruks that you can find at the bottom of this page; http://sithious.webs.com/theorcsofmiddleearth.htm
the following are scouts/isengards converted;
ImageImage
ImageImage
ImageImage
ImageImage
ImageImage

Author:  Bilbo [ Tue Nov 19, 2013 2:40 pm ]
Post subject:  Re: Mordor Uruk-hai

I personally would not recommend it as the Mordor Orcs won't look beefy enough and the Saruman's lot will take forever to be effective. Notably there is an orc captain in metal who really should have been sold as a Mordor Uruk Hai captain as he is tall standing upright, chunky. and equipped with weaponry an armour (most notably the helmet) only seen on Mordor Uruk Hai models and extras in the film! Please see below captain painted as Urk Captain:

Author:  Sithious [ Thu Nov 21, 2013 5:34 pm ]
Post subject:  Re: Mordor Uruk-hai

I edited my post to contain the conversions of just the Isengard models.
I have 2 blisters of each of the Mordor Uruk-hai releases and so I also converted those to prevent duplicates.

Author:  JamesR [ Thu Nov 21, 2013 5:53 pm ]
Post subject:  Re: Mordor Uruk-hai

Sithious those conversions look great. I particularly like the shaman and the one with axe and shield

Author:  Sticky Fingersss [ Thu Nov 21, 2013 7:21 pm ]
Post subject:  Re: Mordor Uruk-hai

Mordor orc archers are nice! You don't see many of them around.

Author:  Sithious [ Thu Nov 21, 2013 7:47 pm ]
Post subject:  Re: Mordor Uruk-hai

I do want to make more archers. The first one was a Warg rider top half (I have two Uruk-hai scout captains on wargs, after Azog they don't look so far fetched now) with a quiver from a WHF Tomb kings skeletons army, the head was scratch made as was one of the arms. The second is obviously a modified scout, removed the shield arm and sculpted a new one, hacked off the sword blade and made it look like he was going for an arrow on his back.
I would like to see some more idea's. I will eventually make some more for my force, with the Hunter orcs on Fell wargs sets having bows and quivers I already have some bits to use.

Author:  Bilbo [ Thu Nov 21, 2013 10:58 pm ]
Post subject:  Re: Mordor Uruk-hai

Sithious wrote:
I edited my post to contain the conversions of just the Isengard models.
I have 2 blisters of each of the Mordor Uruk-hai releases and so I also converted those to prevent duplicates.


Seriously impressive conversions!

Author:  pokyha [ Sun Dec 01, 2013 12:33 am ]
Post subject:  Re: Mordor Uruk-hai

Those all look great thanks for the ideas.

Author:  rutger [ Thu Dec 19, 2013 10:14 am ]
Post subject:  Re: Mordor Uruk-hai

viewtopic.php?f=50&t=23245

check my topic I even got some barad dur conversions in there :D

Author:  Erunion [ Thu Dec 19, 2013 12:48 pm ]
Post subject:  Re: Mordor Uruk-hai

There are some good conversions and ideas in this thread.

If you're not hung up on only GW models, Wargames Factory makes a fantastic Orc set that I plan on using for my Mordor Uruks, eventually. They are beefier than the GW Mordor Orcs, and fit in pretty well. Also, they are pretty affordable. You can check them out here.

Author:  pokyha [ Fri Jan 03, 2014 10:20 am ]
Post subject:  Re: Mordor Uruk-hai

Thanks for all the replies gives me a lot of Ideas.

Erunion those Orcs don't look beffey enough to look like Uruk-hai. Although the pack does look quite amazing. I am unsure whether they ship to New Zealand though.

Author:  Ukfreddybear [ Fri Jan 03, 2014 12:55 pm ]
Post subject:  Re: Mordor Uruk-hai

The wargames factory orcs are the same height as mordor uruk hai. I have a few that I plan to armour up a bit to help them blend into the existing range.

Page 1 of 1 All times are UTC
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
http://www.phpbb.com/