| The One Ring http://wwww.one-ring.co.uk/ |
|
| Making Bases? http://wwww.one-ring.co.uk/viewtopic.php?f=30&t=23218 |
Page 1 of 1 |
| Author: | SidTheSloth [ Mon Jun 11, 2012 7:10 am ] |
| Post subject: | Making Bases? |
Hi all I have recently purchased 8 spare horses for converting but none of them come with bases. Has anybody got exerience in making bases or suggestions on how to make them. I was thinking possibly making them out of wood or plastic. Any ideas? SidTheSloth 
|
|
| Author: | Oldman Willow [ Tue Jun 12, 2012 1:19 pm ] |
| Post subject: | Re: Making Bases? |
Quote: Has anybody got experience in making bases or suggestions on how to make them. I was thinking possibly making them out of wood or plastic. It may not be cost effective to make them yourself if you don't have the tools. This link for cost of wood bases http://www.litko.net/ I make them several different ways but I have a drill press. A hole saw is one option. The closest I can find to 40mm is 1 1/2 inch. Not enough difference to notice but a bit small for the WOTR trays. You can just manage this with a hand held power drill if you clamp the wood down. Remember to drill all the way through in to a scrap piece to avoid tear out. http://www.zorotools.com/g/00068737/k-G ... g_Feed&kw={keyword}&gclid=CLubi6zcyLACFQSynQode13iMQ This circle cutter for larger bases and displays http://compare.ebay.com/like/2907013929 ... s&var=sbar the circle cutter is better because it can be adjusted to40mm http://www.amazon.com/Empire-Level-2799 ... B001DZEEZS I have used paper and balsa wood for bases. The balsa is to soft and the paper looks bad after a short time. If you are going to take time to make nice bases it is silly to use inferior materials.So use a very good grade of 1/8 or 1/4 plywood. |
|
| Author: | GothmogtheWerewolf [ Tue Jun 12, 2012 1:57 pm ] |
| Post subject: | Re: Making Bases? |
You could by 40mm bases from GW site. They sell them in 5s; http://www.games-workshop.com/gws/catal ... rod1590011 |
|
| Author: | Oldman Willow [ Tue Jun 12, 2012 10:29 pm ] |
| Post subject: | Re: Making Bases? |
sorry double post |
|
| Author: | Angularity [ Wed Jun 13, 2012 8:33 am ] |
| Post subject: | Re: Making Bases? |
I've tried with a hole cutter on mdf and plywood, and it's not accurate enough to look good. In this case, it's really better to just save up and spend the money. For larger bases you might be OK just sawing and sanding something to the right size (and the dodgy edges could be covered with a bit of rock or vegetation), but for 40mm's you'd spend an age and end up with something that looks tatty and mis-shapen. |
|
| Author: | Oldman Willow [ Wed Jun 13, 2012 3:03 pm ] |
| Post subject: | Re: Making Bases? |
Quote: I've tried with a hole cutter on mdf and plywood, and it's not accurate enough to look good. In this case, it's really better to just save up and spend the money. For larger bases you might be OK just sawing and sanding something to the right size (and the dodgy edges could be covered with a bit of rock or vegetation), but for 40mm's you'd spend an age and end up with something that looks tatty and mis-shapen. to avoid "dodgy" edges   I agree for 8 bases I would buy the laser cut wood 10 40mm round with heavy duty magnetic bottoms for $3.74 for 100 $19 |
|
| Author: | Telchar [ Wed Jun 13, 2012 6:08 pm ] |
| Post subject: | Re: Making Bases? |
One can also get bases in every size and shape from eBay. |
|
| Page 1 of 1 | All times are UTC |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|