All times are UTC


It is currently Mon Nov 25, 2024 10:47 pm



Post new topic Reply to topic  [ 5 posts ] 
Author Message
 Post subject: Gluing Metal
PostPosted: Wed Jun 24, 2015 6:09 pm 
Kinsman
Kinsman
Offline

Joined: Wed Feb 11, 2015 5:30 am
Posts: 132
When assembling my Rohan Royal Guard metal pack, after washing them, the first 2 glued fine and are ready to paint. The last 1, however, will not seem to mold together. I even tried washing it again, but to no avail. This happened with my Faramir too but I got it to stick eventually by fitting the arm a certain way so it couldn't fall out while the glue dries. But this one won't stick. Any suggestions?

_________________
Forlorn, I remove my Iron Guard from the pile of Goblins; just staring at that 6 with disbelief.
Top
  Profile  
Reply with quote  
 Post subject: Re: Gluing Metal
PostPosted: Wed Jun 24, 2015 9:26 pm 
Wayfarer
Wayfarer
User avatar
Offline

Joined: Fri Oct 17, 2014 8:45 pm
Posts: 39
Location: Combermere, Ontario, Canada
5 minute epoxy is my only glue source for metal.
Top
  Profile  
Reply with quote  
 Post subject: Re: Gluing Metal
PostPosted: Thu Jun 25, 2015 4:40 am 
Elven Warrior
Elven Warrior
Offline

Joined: Mon Mar 02, 2015 6:59 pm
Posts: 966
Location: Calgary, Canada
If you are using CA (Super Glue), you can use a spray that creates a chemical reaction and causes the CA to instant bond. Try to be careful where you aim the spray, as paint doesn't like to stick to it. The chemical bond also creates heat, so I would strongly advise wearing latex gloves to avoid getting glue and bonder on yourself. It hurts like crazy...glue! (tee hee: pun!)

_________________
"Diplomacy is the art of saying 'nice doggie' until you can find a rock." -Will Rogers
Top
  Profile  
Reply with quote  
 Post subject: Re: Gluing Metal
PostPosted: Thu Jun 25, 2015 8:17 am 
Elven Elder
Elven Elder
User avatar
Offline

Joined: Thu Aug 13, 2009 6:37 am
Posts: 3499
Location: Hull UK
Images: 14
Pin the joint first, that will guarantee a hold and the flexibility to have the arm or other body part as you wish before you fill the joint. I use Gorilla Glue as my super glue, immensely strong stuff.

_________________
Commission Service Available

mallysminiatures.blogspot.co.uk
Top
  Profile  
Reply with quote  
 Post subject: Re: Gluing Metal
PostPosted: Thu Jun 25, 2015 1:41 pm 
Elven Elder
Elven Elder
User avatar
Offline

Joined: Thu Apr 01, 2010 11:33 pm
Posts: 3688
Location: Atlanta GA. U.S.A.
Images: 14
The metal currently in use is not very porous.Super glue is not very strong and very thin. Try roughing up the surface with sandpaper.You may need to pin it like already mentioned. I like Gorilla glue too. You may still need to rough up the surface for a good bond. Clamps are another option.

Pin vice http://www.pjtool.com/mushroompinvise.aspx

Image

I often use a paper clip. Smaller bits are often necessary for drilling hands for spears. The dremel will break them if you make the slightest mistake. Hand tools are often the best. The needle nose pliers will cut wire but clippers and flush cutters are better. I purchased several sets of the pliers for the kids to use when they are here. They are about $2 ea.

_________________
"the same as a duck you must be made of wood"
Top
  Profile  
Reply with quote  
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 5 posts ] 

All times are UTC


Who is online

Users browsing this forum: No registered users and 72 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to: