The One Ring
http://wwww.one-ring.co.uk/

silicone mold recipe
http://wwww.one-ring.co.uk/viewtopic.php?f=100&t=31106
Page 1 of 1

Author:  aranel7773 [ Wed Jun 10, 2015 12:08 am ]
Post subject:  silicone mold recipe

just stumbled onto this article, seems interesting and it's probably cheaper than buying a kit, my only criticism is there is not exact formula provided

http://makezine.com/2015/06/09/make-reu ... ty-recipe/

Author:  Valadorn [ Wed Jun 10, 2015 6:34 pm ]
Post subject:  Re: silicone mold recipe

Lol never expected something like this. Have you tried it? Does it give nice results?

Author:  aranel7773 [ Thu Jun 11, 2015 1:20 am ]
Post subject:  Re: silicone mold recipe

no not yet, but I was thinking to give it a shot over the weekend, I'll update the results :-D

Author:  Valadorn [ Thu Jun 11, 2015 8:17 pm ]
Post subject:  Re: silicone mold recipe

I dont have time to check it too, plz provide feedback :D

Author:  gondorian_knight [ Thu Jun 11, 2015 10:14 pm ]
Post subject:  Re: silicone mold recipe

I've used a store bought product before that seems a similar consistency to this. I used it to mould base pieces but found it wasn't able to capture the detail of miniatures for modelling.

The main problem comes down to air bubbles being trapped when applying the putty, which happens much more than using liquid based putties.

This is just my experience with something similar though, might be different with this. Would be interested seeing the results if someone tries it though.

Author:  aranel7773 [ Sun Jun 14, 2015 7:31 pm ]
Post subject:  Re: silicone mold recipe

soooo I gave it a try and I gotta say I'm very surprised with the results

first I think it's great for press molds but I'm sure how well it will work with 2 part molds.

you kind of have to feel out how much corn starch you add to the mix, but the mold sets up pretty quick, its stable and flexible but parts that are thick I think will take longer to cure.

I used a 2 part Alumilite casting resin to cast the pieces which had no problem popping out of the mold.

I think it might not capture the details in a 25MM figure but it should work great for scenery pieces.

Image

as for the cost
corn starch: $1.29
silicone: $3.49
Baby oil: $1.99

there is alot of corn starch and baby oil left over so to create another mold would require more silicone.

Author:  Valadorn [ Mon Jun 15, 2015 5:24 am ]
Post subject:  Re: silicone mold recipe

Indeed it's not good for 25mm, but it could be cheap and good for larger scale's terrain! :twisted:

Page 1 of 1 All times are UTC
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
http://www.phpbb.com/